FAN SHROUD ''OLDIE 30 HP'', CHROME
These 30HP-Style shrouds are available in chrome with or without air ducts. Fits for single port cylinder heads 1200-1500 ccm with standard oil cooler (not for 44-50HP engines).

Fan shroud ''Oldie 30HP'', without air ducts, chrome

FRONT ENGINE TO BELL HOUSING COVER
From 8.69 on, with ''Dog-House'' oil cooler.

Front engine to bell housing cover, chrome

FRONT ENGINE TO BELL HOUSING COVER
This tin helps to keep road trash out of the cooling fan. Up to 7.69, without removed oil cooler.

Front engine to bell housing cover, chrome

FIREWALL, SMOOTH
High polished smooth firewall - one-piece or three-pieces. Must be adjusted for convertible.

Firewall, smooth, 3-pieces

ENGINE TIN, REAR
Rear engine tin without fresh air vents or heat riser cut-outs. This model is used for J-tubes.

Engine tin, rear, chrome, without air ducts

FIREWALL, LOUVERED
For that show car finish, stainless steel firewall, one-piece or three-pieces with high polished smooth side panels. Must be adjusted for convertible.

Firewall, louvered, 3-pieces

OIL FILLER CAP ''NEW STYLE''
Fits on any standard oil filler tube.

Oil filler cap ''New Style''

OIL FILLER TUBE, STANDARD, WITH CONDENSER TUBE
Comes without oil filler cap.

Oil filler tube, with condenser tube, chrome

OIL FILLER TUBE, STANDARD, WITHOUT CONDENSER TUBE
OIL FILLER TUBE, STANDARD, WITHOUT CONDENSER TUBE

Oil filler tube, without condenser tube, chrome

ENGINE BREAST PLATE
Fits in pulley area. Protects lower engine area from heat.

Engine breast plate, chrome

ENGINE TIN, REAR
This tin has the necessary cut-outs for heat risers for use with standard carburators.

Engine tin, rear, chrome, with fresh air

ENGINE TIN, REAR
This tin is used for dual carburators fresh air motors but does not have cut-outs for heat risers.

Engine tin, rear, chrome, with fresh air

COOLING FAN
COOLING FAN

Cooling fan, 34-44 PS (small) for 12 V generator with diametre 105 mm or 12 V alternator